Results 1 to 4 of 4

Thread: Need info for Alignment shops

  1. #1
    Junior Member
    Join Date
    Nov 2011
    Location
    Homer Glen
    Posts
    14

    Need info for Alignment shops

    Does anyone know of an alignment shop that is good at aligning the old mopars?
    67 coronet
    Thanks

  2. #2
    Junior Member
    Join Date
    Apr 2011
    Location
    Orland Park
    Posts
    9
    I had my 67 Dart done there, great job.


    WILRAE INC 9200 S HARLEM BRIDGEVIEW, IL 60455 Store Phone: (708) 599-0900 Store Fax: (708) 233-6364 Store Email: wilrae@sbcglobal.net: Our Hours: Monday:
    wilrae.com -

  3. #3
    Junior Member
    Join Date
    Mar 2012
    Location
    Midlothian, IL
    Posts
    5
    I recently replaced/upgraded my entire suspension on my Coronet. Does this place know how to set the car up to factory specs and align it from scratch. I did a manual drum to power disk brake conversion. Replaced the power steering gear, pitman & idler arms, inner & outer tie-rods, upper & lower control arm bushings & ball joints, anti-sway bar links and bushings, shocks, cam bolts, torsion bars, rear leaf springs & shocks and adding a rear anti-sway bar. The book tells you how to replace/repair one part at a time but not necessarily all of them at the same time. I want to make sure I don't torque things down out of order and break any ball joints.

    Thanks for your input.

  4. #4
    CMC Member furious70's Avatar
    Join Date
    Apr 2011
    Location
    Hanover Park
    Posts
    135
    There used to be a guy off St. Charles road in Lombard? maybe? I can't think of his name, I had him work on my Fury. Real old school guy, he used to bring his 50's 300 letter car to the Naperville show. Anyone know who that was?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •