View Full Version : Repair Need info for Alignment shops
maddart
12-30-2011, 08:46 PM
Does anyone know of an alignment shop that is good at aligning the old mopars?
67 coronet
Thanks
JRD45
12-31-2011, 11:24 AM
I had my 67 Dart done there, great job.
WILRAE INC 9200 S HARLEM BRIDGEVIEW, IL 60455 Store Phone: (708) 599-0900 Store Fax: (708) 233-6364 Store Email: wilrae@sbcglobal.net: Our Hours: Monday:
wilrae.com -
Seals68Coronet
04-27-2012, 10:22 AM
I recently replaced/upgraded my entire suspension on my Coronet. Does this place know how to set the car up to factory specs and align it from scratch. I did a manual drum to power disk brake conversion. Replaced the power steering gear, pitman & idler arms, inner & outer tie-rods, upper & lower control arm bushings & ball joints, anti-sway bar links and bushings, shocks, cam bolts, torsion bars, rear leaf springs & shocks and adding a rear anti-sway bar. The book tells you how to replace/repair one part at a time but not necessarily all of them at the same time. I want to make sure I don't torque things down out of order and break any ball joints.
Thanks for your input.
furious70
04-27-2012, 01:22 PM
There used to be a guy off St. Charles road in Lombard? maybe? I can't think of his name, I had him work on my Fury. Real old school guy, he used to bring his 50's 300 letter car to the Naperville show. Anyone know who that was?
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.